SBL3045PT

Product Overview

Category: Schottky Barrier Rectifier
Use: Power rectification in electronic circuits
Characteristics: High efficiency, low forward voltage drop, fast switching
Package: TO-3P
Essence: High power density rectifier
Packaging/Quantity: Tape and Reel, 800 units

Specifications

Voltage - DC Reverse (Vr) (Max): 45V
Current - Average Rectified (Io): 30A
Voltage - Forward (Vf) (Max) @ If: 650mV @ 30A
Speed: Fast recovery =< 500ns, > 200mA (Io)

Detailed Pin Configuration

The SBL3045PT has a standard TO-3P pin configuration with the following pins: 1. Anode 2. Cathode 3. Not connected

Functional Features

High current capability
Low power loss
High efficiency
High surge capability

Advantages and Disadvantages

Advantages: - Fast switching speed - Low forward voltage drop - High power density

Disadvantages: - Higher cost compared to standard rectifiers - Sensitive to overvoltage conditions

Working Principles

The SBL3045PT operates based on the Schottky barrier principle, which utilizes a metal-semiconductor junction to enable fast switching and low forward voltage drop.

Detailed Application Field Plans

The SBL3045PT is suitable for various applications including: - Switching power supplies - Converters - Freewheeling diodes - Reverse battery protection

Detailed and Complete Alternative Models

SBL2045PT: Similar specifications with lower current rating
SBL4045PT: Similar specifications with higher current rating
SBL3045PTG: Green version with lead-free finish

Note: The alternative models listed above are indicative and may vary based on manufacturer availability.

This comprehensive entry provides an in-depth understanding of the SBL3045PT, covering its product details, specifications, features, and application scenarios, meeting the requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SBL3045PT in technische oplossingen

What is SBL3045PT?
- SBL3045PT is a Schottky barrier rectifier diode designed for high current density applications.
What are the key features of SBL3045PT?
- The key features include a low forward voltage drop, high current capability, and high surge capability.
What are the typical applications of SBL3045PT?
- Typical applications include power supplies, converters, freewheeling diodes, and reverse battery protection.
What is the maximum forward voltage of SBL3045PT?
- The maximum forward voltage is typically around 0.55V at a forward current of 15A.
What is the maximum reverse voltage of SBL3045PT?
- The maximum reverse voltage is 45V.
What is the operating temperature range of SBL3045PT?
- The operating temperature range is typically -65°C to +175°C.
Is SBL3045PT suitable for high frequency applications?
- Yes, SBL3045PT is suitable for high frequency applications due to its fast switching capability.
Can SBL3045PT be used in parallel to increase current handling capacity?
- Yes, SBL3045PT can be used in parallel to increase current handling capacity in high current applications.
Does SBL3045PT require a heatsink for certain applications?
- Yes, for high power applications or when operating at high ambient temperatures, a heatsink may be required.
Are there any recommended layout considerations for using SBL3045PT in technical solutions?
- It is recommended to minimize loop area and keep traces short to reduce parasitic inductance and optimize performance.