PI49FCT3807DQE

Overview

Category: Integrated Circuit
Use: Signal Switching and Routing
Characteristics: High-speed, Low-power, Wide voltage range
Package: 16-pin QSOP
Essence: CMOS Logic IC
Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications and Parameters

Supply Voltage Range: 2.3V to 5.5V
Input Voltage Range: 0V to VCC
Output Voltage Range: 0V to VCC
Operating Temperature Range: -40°C to +85°C
Propagation Delay Time: 1.5ns (typical)
Maximum Quiescent Current: 10μA
Maximum Output Current: ±24mA

Pin Configuration

The PI49FCT3807DQE has a 16-pin QSOP package with the following pin configuration:

```

| | --|1 16|-- VCC --|2 15|-- OE# --|3 14|-- I/O0 --|4 13|-- I/O1 --|5 12|-- I/O2 --|6 11|-- I/O3 --|7 10|-- GND --|8 9|-- GND |_________| ```

Functional Characteristics

The PI49FCT3807DQE is a high-speed CMOS logic IC designed for signal switching and routing applications. It features low power consumption and wide voltage range compatibility. The device operates with a supply voltage ranging from 2.3V to 5.5V and can handle input and output voltages within this range. It has a propagation delay time of 1.5ns (typical) and a maximum quiescent current of 10μA. The IC can source or sink a maximum output current of ±24mA.

Advantages and Disadvantages

Advantages: - High-speed operation - Low power consumption - Wide voltage range compatibility - Compact package size

Disadvantages: - Limited number of I/O pins (4 in total)

Applicable Range of Products

The PI49FCT3807DQE is suitable for various signal switching and routing applications, including but not limited to: - Data communication systems - Networking equipment - Industrial automation - Test and measurement instruments - Consumer electronics

Working Principles

The PI49FCT3807DQE operates based on CMOS logic principles. It uses a combination of transistors to control the flow of signals between its input and output pins. When the OE# (Output Enable) pin is low, the device allows the signals from the input pins to pass through to the corresponding output pins. When the OE# pin is high, the outputs are disabled, and the device enters a high-impedance state.

Detailed Application Field Plans

The PI49FCT3807DQE can be used in various applications, such as:

Data Communication Systems: The IC can be utilized for signal routing in data transmission systems, ensuring efficient and reliable data transfer.
Networking Equipment: It can be employed in network switches and routers to enable seamless switching and routing of signals between different network ports.
Industrial Automation: The device can be integrated into industrial control systems to facilitate signal switching and routing in automated processes.
Test and Measurement Instruments: It can be incorporated into test equipment to enable the selection and routing of signals during testing and measurement procedures.
Consumer Electronics: The IC can be used in consumer electronic devices, such as audio/video equipment, to switch and route signals between different input and output ports.

Detailed Alternative Models

Some alternative models to the PI49FCT3807DQE include:

SN74CBT3257: A similar CMOS logic IC with 4 channels and a wide voltage range.
NC7SB3257: Another CMOS logic IC with 4 channels and low power consumption.
MC74CBT3257: A high-speed CMOS logic IC with 4 channels and a compact package size.
CD74HC4053: A multiplexer/demultiplexer IC with 3 channels and a wide voltage range.
74LVC245: An octal bus transceiver IC with 8 channels and a low-voltage operation.

5 Common Technical Questions and Answers

Q: What is the maximum supply voltage for the PI49FCT3807DQE? A: The device can operate with a maximum supply voltage of 5.5V.
Q: What is the typical propagation delay time of the IC? A: The typical propagation delay time is 1.5ns.
Q: Can