Diodes Incorporated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PI3HDMI412FTBE
Details bekijken DataSheets

PI3HDMI412FTBE

Product Overview

  • Category: HDMI Switch
  • Use: This product is used to switch between multiple HDMI input sources and output them to a single HDMI display device.
  • Characteristics:
    • High-speed switching capability
    • Support for various HDMI resolutions
    • Low power consumption
    • Compact package size
  • Package: QFN (Quad Flat No-leads)
  • Essence: The PI3HDMI412FTBE is an advanced HDMI switch that provides seamless switching between multiple HDMI sources.
  • Packaging/Quantity: Available in reels with a quantity of 2500 units per reel.

Specifications

  • Input Ports: 4 HDMI ports
  • Output Port: 1 HDMI port
  • Supported Resolutions: Up to 4K Ultra HD (3840x2160 pixels) at 60Hz
  • Power Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Package Dimensions: 3mm x 3mm

Detailed Pin Configuration

The PI3HDMI412FTBE has the following pin configuration:

  1. VCC (Power supply voltage)
  2. GND (Ground)
  3. SCL (I2C Serial Clock)
  4. SDA (I2C Serial Data)
  5. HPD (Hot Plug Detect)
  6. CEC (Consumer Electronics Control)
  7. DDC/CEC (Display Data Channel / Consumer Electronics Control)
  8. TMDS Data 2-
  9. TMDS Data 2+
  10. TMDS Data 1-
  11. TMDS Data 1+
  12. TMDS Data 0-
  13. TMDS Data 0+
  14. TMDS Clock-

Functional Features

  • Seamless switching between HDMI input sources
  • Support for HDCP (High-bandwidth Digital Content Protection)
  • Automatic detection and configuration of HDMI devices
  • Low power consumption in standby mode
  • Fast switching speed for smooth video playback

Advantages and Disadvantages

Advantages: - High-speed switching capability ensures smooth video transitions. - Support for various HDMI resolutions allows compatibility with a wide range of devices. - Low power consumption helps conserve energy. - Compact package size enables easy integration into space-constrained designs.

Disadvantages: - Limited number of input ports (4) may not be sufficient for certain applications requiring more inputs. - Lack of audio extraction capabilities, which may be required in some scenarios.

Working Principles

The PI3HDMI412FTBE operates based on the HDMI protocol. It uses advanced switching algorithms to seamlessly route the HDMI signals from the selected input port to the output port. The device also incorporates HDCP support to ensure secure transmission of copyrighted content.

Detailed Application Field Plans

The PI3HDMI412FTBE is suitable for various applications, including but not limited to: - Home entertainment systems - Conference rooms - Digital signage displays - Gaming consoles - Set-top boxes - Media players

Detailed and Complete Alternative Models

  1. PI3HDMI411FTBE: Similar to PI3HDMI412FTBE, but with 3 HDMI input ports instead of 4.
  2. PI3HDMI413FTBE: Similar to PI3HDMI412FTBE, but with 5 HDMI input ports instead of 4.
  3. PI3HDMI414FTBE: Similar to PI3HDMI412FTBE, but with 6 HDMI input ports instead of 4.

These alternative models provide flexibility in terms of the number of HDMI input ports, allowing users to choose the one that best suits their specific requirements.

(Note: The above information has been provided as an example and may not reflect actual product specifications. Please refer to the manufacturer's documentation for accurate and up-to-date information.)

Word Count: 470 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PI3HDMI412FTBE in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of PI3HDMI412FTBE in technical solutions:

  1. Q: What is PI3HDMI412FTBE? A: PI3HDMI412FTBE is a high-speed HDMI switch with four inputs and two outputs, designed for use in various technical solutions.

  2. Q: What are the key features of PI3HDMI412FTBE? A: Some key features of PI3HDMI412FTBE include support for HDMI 2.0b, HDCP 2.2, 4K resolution at 60Hz, automatic input detection, and low power consumption.

  3. Q: How can I connect multiple HDMI sources to a single display using PI3HDMI412FTBE? A: You can connect up to four HDMI sources (such as gaming consoles, media players, or set-top boxes) to the four inputs of PI3HDMI412FTBE, and then connect the two outputs of the switch to your display.

  4. Q: Can PI3HDMI412FTBE handle 4K resolution at 60Hz? A: Yes, PI3HDMI412FTBE supports 4K resolution at 60Hz, providing high-quality video output for compatible displays.

  5. Q: Does PI3HDMI412FTBE support audio transmission as well? A: Yes, PI3HDMI412FTBE supports audio transmission along with video, allowing you to enjoy both high-definition visuals and immersive sound.

  6. Q: Is PI3HDMI412FTBE compatible with older HDMI versions? A: Yes, PI3HDMI412FTBE is backward compatible with previous HDMI versions, ensuring compatibility with a wide range of devices.

  7. Q: Can I control the switching of inputs manually? A: Yes, PI3HDMI412FTBE supports manual switching through external control pins, allowing you to select the desired input source.

  8. Q: Does PI3HDMI412FTBE require an external power supply? A: Yes, PI3HDMI412FTBE requires a 3.3V power supply for proper operation. Make sure to provide the necessary power to the switch.

  9. Q: Can I cascade multiple PI3HDMI412FTBE switches together? A: Yes, you can cascade multiple PI3HDMI412FTBE switches to expand the number of inputs and outputs, enabling more complex HDMI setups.

  10. Q: What are some typical applications of PI3HDMI412FTBE? A: PI3HDMI412FTBE is commonly used in home theaters, conference rooms, gaming setups, multimedia systems, and any other scenario where multiple HDMI sources need to be connected to a single display.

I hope these questions and answers help! Let me know if you have any further queries.