Zie specificaties voor productdetails.
18/25CAP3P
Product Overview
Category
18/25CAP3P belongs to the category of electronic components.
Use
It is used for energy storage and voltage regulation in electronic circuits.
Characteristics
- Capacitance: 18μF
- Voltage Rating: 25V
- Type: Polarized
- Package: Radial leaded
- Essence: Electrolytic capacitor
- Packaging/Quantity: Typically packaged in reels or trays, quantity varies by manufacturer
Specifications
The 18/25CAP3P has a capacitance of 18μF and a voltage rating of 25V. It is a polarized electrolytic capacitor with radial leaded packaging.
Detailed Pin Configuration
The 18/25CAP3P typically has two leads, with the positive lead longer than the negative lead. The positive lead is usually marked with a ‘+’ symbol.
Functional Features
- Energy storage
- Voltage regulation
- Filtering of AC signals
Advantages
- High capacitance value
- Suitable for low-frequency applications
- Cost-effective
Disadvantages
- Limited lifespan compared to non-electrolytic capacitors
- Susceptible to damage if reverse polarity is applied
Working Principles
The 18/25CAP3P operates based on the principles of electrostatic energy storage. When a voltage is applied, it stores energy in its dielectric material and releases it when needed.
Detailed Application Field Plans
Audio Amplifiers
The 18/25CAP3P can be used in audio amplifiers to stabilize the power supply and reduce noise.
Power Supplies
It is suitable for use in linear power supplies to smooth out voltage fluctuations.
LED Drivers
In LED driver circuits, the capacitor helps maintain a stable output voltage.
Detailed and Complete Alternative Models
- 15/35CAP2P
- 20/30CAP4P
- 22/25CAP3P
This completes the entry for 18/25CAP3P, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 18/25CAP3P in technische oplossingen
What is 18/25CAP3P?
- 18/25CAP3P is a technical specification for a specific type of capacitor used in electronic circuits.
What are the key features of 18/25CAP3P?
- The 18/25CAP3P capacitor has a capacitance of 18 microfarads and can withstand a voltage of 25 volts.
Where is 18/25CAP3P commonly used?
- It is commonly used in various electronic devices and technical solutions, such as power supplies, audio equipment, and consumer electronics.
What are the temperature specifications for 18/25CAP3P?
- The operating temperature range for 18/25CAP3P is typically between -55°C to +125°C.
Can 18/25CAP3P be used in high-frequency applications?
- Yes, 18/25CAP3P capacitors are suitable for use in high-frequency applications due to their stable performance characteristics.
Are there any polarity considerations for 18/25CAP3P?
- No, 18/25CAP3P capacitors are non-polarized, meaning they can be connected in either direction in a circuit.
What are the typical dimensions of 18/25CAP3P?
- The physical dimensions of 18/25CAP3P capacitors are typically specified as per industry standards, with variations based on the manufacturer.
Can 18/25CAP3P be replaced with a different capacitor with similar specifications?
- Yes, as long as the replacement capacitor meets the same capacitance and voltage rating, it can be used as a substitute for 18/25CAP3P.
What are the potential failure modes for 18/25CAP3P?
- Common failure modes include open circuits, short circuits, and changes in capacitance value over time or under extreme conditions.
Are there any special handling considerations for 18/25CAP3P during assembly?
- Standard ESD (electrostatic discharge) precautions should be followed during the handling and assembly of 18/25CAP3P to prevent damage to the components.